NASWebsite.com - Recent changes [en]

Thecus N5200 Module: NETSNMPD

Fajo — Fri, 03 Sep 2010 15:09:00 GMT

← Older revision		Revision as of 15:09, 3 September 2010
Line 51:		Line 51:
	* thecusIO.fan1rpm (thecusIO.1) - integer		* thecusIO.fan1rpm (thecusIO.1) - integer
	* thecusIO.fan2rpm (thecusIO.2) - integer		* thecusIO.fan2rpm (thecusIO.2) - integer
		+
		+	== Compatibility ==
		+
		+	The module should run on the following models:
		+	* 1U4500, 1U4600, N0503, N4100PRO, N4200, N5200, N5200PRO, N5500, N7700, N7700+, N7700PRO, N7700SAS, N8800, N8800+, N8800PRO, N8800SAS

	== Installation ==		== Installation ==

Thecus N5200 Module: APCUPSD

Fajo — Fri, 03 Sep 2010 15:08:31 GMT

← Older revision		Revision as of 15:08, 3 September 2010
Line 27:		Line 27:

	This module monitors APC UPS devices and will shutdown the system on specific thresholds if configured and supported by the UPS. In contrast with the N5200 integrated UPS solution (based on [http://www.networkupstools.org/ Network UPS Tools (NUT)]) this module supports APC devices connected through the USB port. Further, if the UPS is not directly connected to this system the module can be used in client mode. In client mode a apcupsd server will be queried for UPS status information. If the UPS is connected directly this system can act as server for other apcupsd clients.		This module monitors APC UPS devices and will shutdown the system on specific thresholds if configured and supported by the UPS. In contrast with the N5200 integrated UPS solution (based on [http://www.networkupstools.org/ Network UPS Tools (NUT)]) this module supports APC devices connected through the USB port. Further, if the UPS is not directly connected to this system the module can be used in client mode. In client mode a apcupsd server will be queried for UPS status information. If the UPS is connected directly this system can act as server for other apcupsd clients.
		+
		+	== Compatibility ==
		+
		+	The module should run on the following models:
		+	* 1U4500, 1U4600, N0503, N4100PRO, N4200, N5200, N5200PRO, N5500, N7700, N7700+, N7700PRO, N7700SAS, N8800, N8800+, N8800PRO, N8800SAS

	== Installation ==		== Installation ==

Talk:Thecus N3200PRO Firmware Hacking

Voz — Fri, 03 Sep 2010 07:06:00 GMT

Created page with 'Кто-нибудь разбирался с локализацией терминала этого девайса? Что-то у меня не получается'

New page

Кто-нибудь разбирался с локализацией терминала этого девайса? Что-то у меня не получается

Thecus N5200 Hardware

Fajo — Sun, 29 Aug 2010 17:21:15 GMT

Default Hardware:

← Older revision		Revision as of 17:21, 29 August 2010
Line 2:		Line 2:

	The Thecus N5200 is a 5-bay NAS device. There are two versions:		The Thecus N5200 is a 5-bay NAS device. There are two versions:
-	* N5200B<br\>with 2 x Gigabit RJ-45 Connector	+	* N5200B<br/>with 2 x Gigabit RJ-45 Connector
-	* N5200BR<br\>with 1 x Gigabit RJ-45 Connector and 4 port Gigabit switch	+	* N5200BR<br/>with 1 x Gigabit RJ-45 Connector and 4 port Gigabit switch

	== CPU ==		== CPU ==

User:Mhoe

Mhoe — Sun, 29 Aug 2010 16:25:30 GMT

New page

[[Thecus_N5200_Hardware|Thecus N5200B]]
* Firmware 2.00.04
* 4x Samsung Spinpoint HD501LJ (500GB)
* Printer: Canon Pixma 140

Thecus N5200 Hardware

Mhoe — Sun, 29 Aug 2010 15:50:51 GMT

Default Hardware:

← Older revision		Revision as of 15:50, 29 August 2010
Line 1:		Line 1:
	= Default Hardware =		= Default Hardware =
		+
		+	The Thecus N5200 is a 5-bay NAS device. There are two versions:
		+	* N5200B<br\>with 2 x Gigabit RJ-45 Connector
		+	* N5200BR<br\>with 1 x Gigabit RJ-45 Connector and 4 port Gigabit switch

	== CPU ==		== CPU ==
Line 23:		Line 27:
	bogomips : 1199.69		bogomips : 1199.69
	</pre>		</pre>
		+
		+	The CPU is soldered on the motherboard.

	== Memory ==		== Memory ==

-	~~256MiB~~ DDR	+	256MB DDR

	== PSU ==		== PSU ==

Thecus N3200PRO Module: TWONKYMEDIA

Man3200pro — Sun, 29 Aug 2010 09:06:07 GMT

Versions:

← Older revision		Revision as of 09:06, 29 August 2010
Line 22:		Line 22:
	** Works on firmware: 1.00.04.2, 1.00.05c		** Works on firmware: 1.00.04.2, 1.00.05c
	** Does not work on firmware: ?		** Does not work on firmware: ?
-	** Download: [http://www.~~badongo~~.~~com~~/~~file~~/~~19418174~~ N3200PRO_M3800-TWONKYMEDIA1.0.18.zip]	+	** Download: [http://www.uploadarea.de/upload/antt81v9pseyyzb3lep2pjaq7.html N3200PRO_M3800-TWONKYMEDIA1.0.18.zip]
	** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]		** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]

Line 31:		Line 31:
	** Works on firmware: 1.00.04.2		** Works on firmware: 1.00.04.2
	** Does not work on firmware: ?		** Does not work on firmware: ?
-	** Download: [http://www.~~badongo~~.~~com/~~de/~~file~~/~~14401616~~ N3200PRO-TWONKYMEDIA1.0.10.zip]	+	** Download: [http://www.uploadarea.de/upload/21ab7yu8jwtyypb1a5zhfczcx.html N3200PRO-TWONKYMEDIA1.0.10.zip]
	** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]		** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]

Line 40:		Line 40:
	** Works on firmware: 1.00.04.2		** Works on firmware: 1.00.04.2
	** Does not work on firmware: ?		** Does not work on firmware: ?
-	** Download: [http://www.~~badongo~~.~~com/~~de/~~file~~/~~13850814~~ N3200PRO-TWONKYMEDIA1.0.00.zip]	+	** Download: [http://www.uploadarea.de/upload/jta7cmare4r76t1bi6u54wjzv.html N3200PRO-TWONKYMEDIA1.0.00.zip]
	** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]		** Read the [http://naswebsite.com/wiki/TwonkyMedia_Revision_History TwonkyMedia revision history]